| Certification: | TUV, ISO, RoHS, CE |
|---|---|
| Condition: | New |
| Application: | Railway, Mine, Farmland, Highway |
| Transmission: | Hydraulic |
| Walking Mode: | Wheeled |
| Type: | Small Grader |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
240HP GR2403 motor graders equipment.
1.Energy-saving and noise-reduction: Low-speed engine transmission line is used, the specific point of the fuel consumption is low, energy saving and environmental protection; the transmission system is configured at low speed, the average fuel consumption is reduced by about 8%.
2.Powerful: Using Dongkang High-efficiency State III Variable Power Engine.
3.With load rotation: improve hydraulic system pressure, blade rotary force is greatly improved, high-frequency quenching gear ring, wear resistance and life expectancy, to achieve load rotation.
4.20%Efficient operation: Increase the displacement of hydraulic pumps and hydraulic motors, and increase the speed of cylinders by 20%.
| Item | GR2403 | ||
| Basic parameters | Engine model | QSB6.7 | |
| Rated power/speed | 178kW/2000rpm | ||
| Overall dimension (standard) | 8970x2625x3420 | ||
| Total weight (standard) | 17000 kg | ||
| Tire specification | 17.5-25 | ||
| Ground clearance (front axle) | 430mm | ||
| Tread | 2156mm | ||
| Space of front and rear axles | 6219 mm | ||
| Space of middle and rear wheels | 1538 mm | ||
| Performance parameters | Forward velocity | 5,8,11,19,23,38km/h | |
| Reverse speed | 5,11,23km/h | ||
| Tractive effort f=0.75 | 87 kN | ||
| Maximum gradeability | ≥25% | ||
| Tire inflation pressure | 260kPa | ||
| Working system pressure | 20MPa | ||
| Transmission pressure | 1.3-1.8Mpa | ||
| Working parameters | Maximum steering angle of front wheel | ±48° | |
| Maximum slant angle of front wheel | ±17° | ||
| Maximum oscillating angle of front axle | ±15° | ||
| Maximum oscillating angle of equilibrium box | ±15° | ||
| Maximum steering angle of frame | ±27° | ||
| Scrape knife | Maximum lift height | 400mm | |
| Maximum cutting depth | 500mm | ||
| Maximum tilt angle | 90° | ||
| Cutting angle | 28°-70° | ||
| Angle of revolution | 360° | ||
| Length & chord height | 3965x610mm | ||
| Oil filling amount | Coolant | 50L | |
| Fuel tank | 280L | ||
| Engine | 24L | ||
| Transmission | 38L | ||
| Balancing box | 46L | ||
| Drive axle | 28L | ||
| Hydraulic oil | 110L | ||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}