Chinese Xe60 6 Ton Mini Excavator for Sale
XE60CA adopts a YANMAR engine excellent in environmental protection and energy saving. Moreover, it uses a load sensitive hydraulic system, able to guarantee operator's better controlling of the machine and better movement coordination, reduce the demand for operation proficiency of the driver; in addition, the reliability of this system has been recognized by the majority of users. The stress analysis and structure optimization of such key components platforms, swing arms, bucket rods and lower chassis has fully guaranteed the reliability of the structural members. The daily maintenance is sufficiently convenient and you only need to open the rear hood for maintenance of the engine oil, fuel and air filters.
Small excavator XE60CA
1. Operation weight: 5630kg
2. Standard 0.23m3 bucket
3. Max. Digging height: 5630mm
4. US OILGEAR hydraulic system
5. Engine: 39.8kw JAPAN YANMAR 4TNV94L
6. XCg electronic system
7. Cabin with A/C, ROPS/FOPS
8. With break hammer SB40/GB2T
9. With Rubber crawler
XCg hydraulic crawler excavator XE60 produced in CAT technology with Japan YANMAR engine has very good performance, it can be equipped with RUBBER CRAWLER, specially suitable for city road use, it could be used for digging dutches, and break normal concrete road.
US OILGEAR hydraulic system and XCg electronic system has provided XE40 excavator with reliable and excellent performance.
| Model |
|
XE60CA |
| Operating weight |
kg |
5960 |
| Standard bucket capacity |
m³ |
0.09-0.23 |
| Engine |
Engine Model |
/ |
4TNV94L |
| Direct injection |
/ |
√ |
| Four strokes |
/ |
√ |
| Water cooling |
/ |
√ |
| Turbo charged |
/ |
× |
| Air to air intercooler |
/ |
× |
| No. of cylinders |
/ |
4 |
| Rated power/speed |
kw/rpm |
39.8/2200 |
| Max. torque/speed |
N.m |
214/1100 |
| Displacement |
L |
3.054 |
| The main performance |
Travel speed |
km/h |
4.2/2.2 |
| Swing speed |
r/min |
11 |
| Max. gradeability |
/ |
30° |
| Ground pressure |
kPa |
32.5 |
| Max.Bucket digging force |
kN |
48.3 |
| Max.arm crowd force |
kN |
32.5 |
| Hydraulic system |
Main pump |
/ |
Rexroth/Mr Gale |
| Rate flow of main pump |
L/min |
138/143 |
| Max pressure of prime relief valve |
MPa |
24.5 |
| Max pressure of travel system |
MPa |
22 |
| Max pressure of swing system |
MPa |
21 |
| Max pressure of pilot system |
MPa |
3.5 |
| Fuel tank capacity |
L |
110 |
| Oil capacity |
Hydraulic tank capacity |
L |
85 |
| Engine lubrication |
L |
12 |
| A Overall length |
mm |
5960 |
| Overall dimensions |
B Overall width |
mm |
1920 |
| C Overall height |
mm |
2585 |
| D Overall width of upperstructure |
mm |
1780 |
| E Track length |
mm |
2540 |
| F Overall width of undercarriage |
mm |
1920 |
| G crawer width |
mm |
400 |
| H Dozer black(width/height) |
mm |
1920×340 |
| I Tumbler distance |
mm |
1990 |
| J Crawer gauge |
mm |
1550 |
| K Clearance under counter weight |
mm |
710 |
| L Ground clearance |
mm |
385 |
| M Min.tail swing radius |
mm |
1660 |
| A Max. digging height |
mm |
5630 |
| Working range |
B Max. dumping height |
mm |
3945 |
| C Max. digging depth |
mm |
3830 |
| E Max. vertical wall digging depth |
mm |
2680 |
| F Max. digging reach |
mm |
6130 |
| G Min. swing radius |
mm |
2460 |
| H Max.dozer lifting height |
mm |
390 |
| I Max.dozer cutting depth |
mm |
560 |
| Angle of arm deflection |
Degree |
/ |
Audited Supplier 
){kind=link}
){kind=link}