Liugong Brand 180HP Motor Grader Road Grader with Front Blade and 3-shanks Ripper CLG4180D
Product Description
- Fuel Efficient Dongfeng Cummins Engine.
- Low Vibration, Noise, Dust +UV Resistant cab
- Meritor wet axle with "no-spin" differential lock as standard
- Balance box enables the 4 rear wheels to swing up and down by +/- 15°
Product Parameters
Engine |
|
DCEC 6CTAA8.3-C215 |
Rated Power |
(kW) |
160(215)@2200 |
Blade Width |
mm(inches) |
3960(156) |
Maximum Speed |
Km/h (mph) |
40.3 (25) |
Draw Bar Pull |
(kN) |
86 |
Operating Weight |
Kg(Lb) |
16500(36376) |
ENGINE |
Tier |
|
II |
Make |
|
Dongfeng Cummins |
Gross Power |
KW(HP)@rpm |
160(215)@2200 |
Net Power |
KW(HP)@rpm |
144(195)@2200 |
Peak Torque |
|
908N. M/1500rpm |
Torque Rise % |
|
31% |
Number of Cylinders |
|
6 |
Aspiration |
|
Turbo air-to-air aftercooled |
TRANSMISSION |
Transmission Type |
|
Power shift |
Transmission Configuration |
|
6f/3r |
Torque Converter |
|
Three-member single turbine |
Maximum Travel Speed, fwd |
(km/h) |
42 (25.8) |
Maximum Travel Speed, rev |
(km/h) |
25.6 (15.9) |
Number of Speeds, fwd |
|
6 |
Number of Speeds, rev |
|
3 |
AXLES |
Front Axle Make |
|
LiuGong Weld axle |
Rear Axle Make |
|
Meritor |
Differential Type |
|
No-spin limited slip standard |
Final Drive Type |
|
Chain drive |
Axle Oscillation |
|
±15° |
Front Axle Type |
|
All welded steel frame |
Front Axle, Wheel Lean Angle |
|
±17° |
STEERING |
Steering Configuration |
|
Load sensor steering gear |
Steering Relief Pressure |
(MPa) |
17 |
Minimum Turning Radius |
(inches) |
8000(315) |
Steering Angle |
|
±45° |
Frame Articulation Angle |
|
±20° |
BRAKES |
Service Brake Type |
|
(Dry)shoe |
Service Brake Location |
|
Rear axle only |
Service Brake Actuation |
|
Hydraumatic |
TIRES |
Tire Size |
|
17.5-25 PR12/L3 |
HYDRAULIC SYSTEM |
Main Pump Type |
|
Gear |
Main Relief Pressure |
(MPa) |
18 |
Pilot Pump Flow |
L(Gal)/min |
126(33) |
WORKING CAPACITIES |
Maximum Draw Pull |
(kN) |
90 |
Cutting Pressure |
Kg(Lb) |
8100(17857) |
TANDEM DRIVE PERFORMANCE |
Height |
mm(inches) |
600(24) |
Width |
mm(inches) |
210(8) |
Thickness, inner wall / outer wall |
mm(inches) |
20/20(0.8/(0.8) |
Center Distance |
mm(inches) |
1538(61) |
Oscillating Angle |
|
±15° |
MOLDBOARD PERFORMANCE |
Bank Cut Angle |
|
40~70 |
Moldboard Lift Above Ground |
mm(inches) |
405(16) |
Moldboard Side Shift, right / left |
mm(inches) |
725/675(29/27) |
Maximum Sloping Angle |
|
90° |
Cutting Depth |
mm(inches) |
600(24) |
Circle Rotation |
|
360° |
Circle Diameter |
mm(inches) |
1455(57) |
Circle Thickness |
mm(inches) |
140(6) |
DIMENSIONS |
Wheelbase |
mm(inches) |
6230(245) |
Overall Length |
mm(inches) |
8971(353) |
Overall Height with Cab |
|
3438(135) |
Overall Width |
mm(inches) |
2600(102) |
Clearance under Front Axle |
mm(inches) |
645(25) |
Moldboard Standard Length |
mm(inches) |
4270(168) |
Moldboard Standard Thickness |
mm(inches) |
19(0.7) |
Moldboard Standard Height |
mm(inches) |
650(24) |
OPERATING WEIGHTS |
Operating Weight |
Kg(Lb) |
16500(36376) |
On Front Wheels |
Kg(Lb) |
4700(10362) |
On Rear Wheels |
Kg(Lb) |
11800(26015) |
SERVICE CAPACITIES |
Fuel Tank |
L(Gal) |
230(61) |
Engine Oil |
L(Gal) |
22(6) |
Cooling System |
L(Gal) |
45(12) |
Hydraulic Reservoir |
L(Gal) |
186(49) |
Transmission And Torque Converter |
L(Gal) |
45(12) |
Tandems, Each |
L(Gal) |
28(7) |
Detailed Photos
Our Advantages