China Top Brand129kw Gr1653IV 3 Series Motor Grader for Highway, Airport and Agriculture

• Customization: Available
• After-sales Service: Provided
• Warranty: 1 Year
• Model NO.: GR1653IV
• Walking Mode: Wheeled
• Type: Small Grader
• Colour: Optional
• Machinery Test Report: Provided
• Transport Package: Provided
• Specification: 8625× 2625× 3420mm
• Trademark: Maxizm
• Origin: China

Product Description

China top brand129kw GR1653IV 3 Series Motor Grader for highway, airport and agriculture

Product Description

 

(1) Energy saving and noise reduction: The low-speed engine transmission route is adopted, and the transmission system is configured with a low speed ratio, which reduces the average fuel consumption by about 8%; the engine, cab, and seat have three-level vibration reduction; the engine frequency reduction and deceleration, the fan has a large diameter and low speed ratio, the hood is covered with sound-absorbing sponge, and the cab is well sealed, so the noise of the whole machine is reduced.

(2) Powerful power: The Shanghai Diesel IV stage variable power engine is adopted, and the optimal torque converter circulation circle diameter is selected to achieve the best match between the torque converter and the engine, reduce the start-up and acceleration time of the whole vehicle, and increase the torque output when working at low speed, which is strong and powerful.

(3) Load rotation: The hydraulic system pressure is increased, the blade rotation force is greatly improved, the gear ring is high-frequency quenched, the wear resistance and life are improved, and the load rotation operation is realized.

(4) Efficient operation: The displacement of the hydraulic pump and hydraulic motor is increased, and the cylinder speed is increased by 20%, the operation efficiency is leading in the industry, and the blade arc is optimized, which can quickly and efficiently turn and discharge the soil, and achieve the best load distribution and the smallest material accumulation in the turntable area.

(5) Safe and reliable: CAE global optimization of structural parts, reliable and durable, long life; patented slewing bearing drive axle, long service life and higher reliability.

(6) Flexible and maneuverable: single-cylinder large steering angle front axle with XCMG patented technology, combined with articulated frame, small turning radius, flexible and maneuverable.

(7) Comfortable operation: diamond-shaped cab with six-point support shock absorption, optimized operating mechanism, reduced operating force and operating stroke, 30% reduction in operating force, more flexible and comfortable operation, ergonomic operating system, more comfortable operating environment.

(8) Convenient maintenance: rear-flip hydraulic lifting hood with large door on the hood, convenient for maintenance and maintenance of the whole machine.

Basic specification
Engine model	SC7H180.1G3
Rated power/speed	128kW/2000rpm
Dimension(LxWxH)	8900×2625×3420mm
Operating weight(Standard)	15000kg
Performance specification
Travelling speed ,forward	5,8,11,19,23,38 km/h
Travelling speed ,reverse	5,11,23 km/h
Tractive force(f=0.75)	77KN
Max. gradeability	20%
Tire inflation pressure	260 kPa
Working hydraulic pressure	20 MPa
Transmission pressure	1.3~1.8MPa
Operating specification
Max. steering angle of front wheels	±48°
Max. lean angle of front wheels	±17°
Max. oscillation angle of front axle	±15°
Max. oscillation angle of balance box	15
Frame articulation angle	±27°
Min. turning radius using articulation	7.3m
Blade
Maximum lift above ground	450mm
Maximum depth of cutting	500mm
Maximum blade position angle	90°
Blade cutting angle	28°-70°
Circle reversing rotation	360°
Moldboard width X height	3965×610mm