Product Description
1.High Reliability
Upgraded & enhanced front & back frames
Optimized H-series bucket
Enhanced front axle of the H-Series
Enhanced brake caliper
Fully optimized layout of pipes
Waterproof connectors
Improved painting process
2.High Efficiency and Energy Conservation
Patented dual-pump confluence and diffluence technology
Standard models provide the highest dumping height
Small turning radius
Biggest traction under combinatory operating conditions
Green, turbocharged, intercooled engine
New energies like LNG/CNG Patented proportional differential
3.Safety
Complete safety signs
Neutral start protection for safer operation
Optional ROPS/FOPS cab
Flame retardant materials and EU-certified glass are in the cab, offering higher safety
Newly added rear wiper
4.Comfortable Operation
Low-noise design for the machine
Ergonomics design of cab
Large field view in the H-series cab
Electronic oil level indicator comes as standard
Optional models with adjustable directions
5.Convenient Maintenance
Centralized lubricating grease inlet for easier adding butter
Central electrical control box for easier servicing
Wide-opening hood for easier servicing & maintenance of engine
Convertible fuel tank
Particular toolbox design
Optimized servicing marks
Product Parameters
| Overall Data |
|
Steering System |
| Bucket Capacity (m3) |
1.05 |
Type |
Hydraulic Load Sensor System |
| Rated Payload (kg) |
1800 |
Cylinders-bore x Stroke (mm) |
2-63X280 |
| Operating Weight (kg) |
5600 |
Steering Pump |
Shared With Working Pump |
| Traction Force (kN) |
53 |
System Pressure (MPa) |
14 |
| Breakout Force (kN) |
52 |
Steering Angle |
±35° |
| L×W×H(mm) |
5700×1950×2930 |
|
| Travel Speeds (km/h): |
Hydraulic System |
|
| |
I |
II |
|
Lift Cylinders-bore x Stroke (mm) |
2-90X589 |
| Forward |
8 |
21 |
|
Tilt Cylinder-bore x Stroke(mm) |
1-100X387 |
| Reverse |
8 |
21 |
|
Working Pump |
Gear Pump |
| Engine |
YTO YT4B3-24 |
Flow Rate (L/min/rpm) |
120/2400 |
| Rated Power (kW·hp)/rpm) |
63·(86)/2400 |
System Pressure (MPa) |
16 |
| Rated Torque (Nm/rpm) |
275/1680-1800 |
Hydraulic Cycle Time, Rated Load in Bucket (In Second): |
| Starting Voltage (V) |
24 |
Raise(Loaded) |
Dump |
Lower(Empty) |
Total |
| Drive Train |
4.9 |
0.8 |
3.7 |
9.4 |
| Torque Converter |
Single-stage, Single-turbine, 3-element |
Electrical System |
| Torque Ratio |
3.7 |
System Voltage (V) |
24 |
| Transmission |
Fixed Shaft Hydraulic Shift Spur Gear |
Battery(2 in series) (Ah) |
180 |
| Gear |
2F/2R |
Lamp Voltage (V) |
24 |
| Pressure of Transmission (MPa) |
1.2-1.5 |
Service Refill Capacity |
| Main Reducer |
Spiral Bevel Gear Single-stage Reduction |
Fuel Tank (L) |
80 |
| Final Reducer |
Planetary Reduction |
Hydraulic Tank (L) |
80 |
| Tire |
16/70-20 |
Transmission (L) |
18 |
| Brake System |
Front Axle (L) / Rear Axle (L) |
12/12 |
| Service Brake |
Air Drive, Four Wheel Brake (Dry) |
Air Conditioning System (Optional) |
| Setting Pressure (MPa) |
0.78 |
Heating Capacity (W) |
4500 (±10%) |
| Parking & Emergency Brake |
Flexible Shaft Controlled Caliper |
Cooling Capacity (W) |
3200 (±10% |
Detailed Photos
Audited Supplier 
){kind=link}
){kind=link}