| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | Support |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
L933 issuitable for bulk materials, with high cost-performance, large breakout force, small turning radius, flexible operations, and is widely used in the construction sites, aggregate plants, and lumber yards.
Reliable:
1.The enhanced front and rear frames are proved by 100,000-cycle reliability test. The lower hinge joint is upgraded from knuckle bearings to tapered roller bearings to prolong the life by 50%. The wheelbase of the rear frame is extended to enhance the stability and tipping load of the whole machine.
2.Adopted mature and reliable fixed shaft transmission, with smooth gearshift, high reliability, and extended life.
3.Adopted enhanced drive axle with optimized gear design, improve the gear reliability by 20%
4.Adopted load-sensing full hydraulic steering system, with easy operation, accurate steering, and high reliability.
Comfort:
1.The spacious and bright cab and the seat of large folding angle improve the driver's comfort.
Spacious and bright cap, with large folding angle seat, improve the driver’s comfort.
2.Adopted integrated stepping panel, with reasonable layout, high definition and brightness.
3.The optimized air conditioning system remarkably improves the cooling performance.
Convenience:
1.The transmission filter is outside, easy to maintain and replace.
2.The upturning engine hood, easy to repair and maintain.
3.The instruments can display the engine malfunctionsfor real-time, with high human-machine interactivity.
4.The engine is fitted with standard malfunction diagnostic interface, ease to checkand maintain.
| Overall dimension | |
| L×W×H |
7100×2520×3240mm
|
| Wheel base |
2850mm
|
| Min. ground clearance |
375 mm
|
| Max. dumping height |
2950 mm
|
| Dumping distance |
1050 mm
|
| Dumping angle |
-45°
|
| Bucket rollback at ground level |
44°
|
| Wheel tread |
1865mm
|
| Steering angle |
36°
|
| Horizontal crossing radius |
6180 mm
|
| Min.turning radius |
5375mm
|
| Overall parameters | |
| Bucket capacity |
1.8m³
|
| Rated load |
3000kg
|
| Operating weight |
10150kg
|
| Max.tractive force |
≥96 kN
|
| Max.breakout force |
≥96 kN
|
| Tipping load |
≥66 kN
|
| Engine | |
| Model |
WP6G125E331
|
| Rated power |
92kw
|
| Transmission system | |
| Torque converter |
Single-stage three-element
hydraulic torque converter
|
| Transmission type |
Fixed shaft power shift
|
| Gears |
Forward 4 reverse 2
|
| Hydraulic system of working device | |
| Type | Mechanical/manual control |
| total time |
9.0 s
|
| Brake system | |
| Service brake type |
Air over hydraulic disc type
|
| Parking brake type |
Manual,Caliper disc type
|
| Steering system | |
| Type |
Load sensing full hydraulic articulated steering
|
| System pressure |
14 MPa
|
| Fill capacity | |
| Fuel |
160 L
|
| Hydraulic oil |
130 L
|
| Engine |
18 L
|
| Transmission |
45 L
|
| Drive axle | Forward 18L + Reverse 18.5L |
| Braking system |
4 L
|
){kind=link}