| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Environmental Friendly
- The emission meets EC and EPA new regulation.
- High-efficiency hydraulic system to lower the fuel consumption.
- Using environmental friendly material.
- Damping device on the mast to reduce impact and vibration.
- Sound insulating and absorbing device is used to reduce the noise.
Ergonomics design
- Using power braking system to reduce footplate strength.
- Control lever right located to effectively reduce drivers arm tiredness.
- Dual combined switch lever as a car to enable easy operating.
- Wide mast with good visibility.
- Wide space for boarding and driving, increasing leg space.
- Engine automatic monitor control, when the engine oil pressure is too low or water temperature is too high, the engine will be
automatically shut off.
Safety performance
- Enclose cabin is made of assembling steel plate, high strength overhead is designed to ensure safety.
- Parking brake with a safety protection device, when the parking brake is working, the forklift will not move even the direction
lever is turned.
- Safety device in mast hydraulic system prevents material from falling down in case of hose broken.
- High-pressure hose is designed far away from the driver.
- Safety wire harness, using a waterproof plug.
| Model | CPCD30 | ||
| Power type | |||
| Rated capacity | kg | 3000 | |
| Load center | mm | 500 | |
| Lift height | mm | 4500 | |
| Free lift height | mm | 145 | |
| Fork size | mm | 1220×125×45 | |
| Front overhang | mm | 482 | |
Overall |
Length to face of forklift | mm | 2695 |
| Overall width | mm | 1225 | |
| Mast lowerd height | mm | 2070 | |
| Mast extended height | mm | 4250 | |
| Overhead guard height | mm | 2090 | |
| Turning radius | mm | 2420 | |
| Min.right angle aisle width | mm | 2885 | |
Speeds |
Drive speeds | /h | 18/19.5 |
| Lifting speeds | mm/s | 470/520 | |
| Lowering speeds | mm/s | ≤600 | |
| Max.grade ability | % | 15 | |
| Total weight | kg | 4350 | |
Tires |
Frot | 28*9-12PR | |
| Rear | 6.5-10-10PR | ||
| Wheeslbase | mm | 1700 | |
Tread |
Front | mm | 1000 |
| Rear | mm | 970 | |
Engine |
Model | Xinchang 490BPG | |
| Rated output | kw/rpm | 37/2650 | |
| Rated torque | N.m/rpm | 148/2000 | |
| No.of cylinder | 4 | ||
| Displacement | L | 2.54 | |
){kind=link}