| Customization: | Available |
|---|---|
| After-sales Service: | Oversea |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 100000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
China High Efficiency 1m Width Cold Milling Machine XM1003 XM1003K
Eden Gao
Performance Characteristics:
* This machine is powered by Shangchai 162kW electronic injection engine is applied to achieve higher power reserve than domestic like products. With higher working power, this engine can be used to effectively handle the working conditions with harder material and higher milling depth.
* This engine conforms to the China-lll emission regulation to advocate environmental-friendly construction and reduce environmental pollution. With the fuel consumption at 40L/h under rated power, this engine features lower fuel consumption and better operation economy.
* The milling drum in diameter of 930mm is installed to achieve the 300mm maximum milling depth and remove the whole asphalt concrete pavement by single cycle.
* The 45m/min working speed is higher than the like products. Three working speeds are provided to achieve more accurate matching between working speed and working load.
* The milling drum is driven by mechanical belt to achieve higher drive efficiency than hydraulic drive.
* The super-high capacity water tank and fuel tank (860L and 450L respectively) guarantee longer continuous working time and reduce the down time.
* The intelligent sprinkling control technology is applied so that the sprinkling is turned off automatically at the stop of milling and is turned on automatically at the restart of milling to save the manual operation steps.
|
Item
|
Unit
|
Parameter
|
|
Engine Model
|
-
|
|
|
Manufacturer
|
-
|
SC9DK220G3
|
|
Rated power/speed
|
kw/rpm
|
162/2200
|
|
Working speed
|
m/min
|
0-45
|
|
Traveling speed
|
km/h
|
0-8
|
|
Theoretical gradeability
|
%
|
50
|
|
Ground clearance
|
mm
|
100
|
|
Gross machine weight
|
kg
|
15600
|
|
Maximum Milling width
|
mm
|
1000
|
|
Maximum milling depth
|
mm
|
180
|
|
Amount of tools pcs
|
-
|
82
|
|
Diameter of rotor (Including cutter)
|
mm
|
700
|
|
Transportation dimensions
|
mm
|
4690*2500*3220
|
|
Dimensions of belt conveyor
|
mm
|
8050*1070*980
|
|
Fuel tank
|
L
|
350
|
|
Hydraulic oil tank
|
L
|
130
|
|
Water tank
|
L
|
800
|
){kind=link}