Liugong 180HP Motor Grader Clg4180d with Front Blade and Back Ripper

• After-sales Service: 1 Year
• Warranty: 1 Year
• Certification: TUV, ISO, RoHS, CE
• Condition: New
• Application: Railway, Mine, Farmland, Highway
• Transmission: Hydraulic
• Model NO.: CLG4180D
• Walking Mode: Wheeled
• Type: Medium-sized Grader
• Engine: 6CTA8.3-C215
• Rated Power: 142 Kw (190 HP) @ 2200 Rpm
• Operating Weight: 15500kg
• Blade Width: 3960 mm
• Drawbar Pull: 86 Kn
• Transport Package: Nude Package
• Specification: 9090*2600*3380mm
• Trademark: LiuGong
• Origin: China
• HS Code: 8429209000
• Production Capacity: 1000units/Month

Product Description

LiuGong New 180hp Motor Grader CLG4180 with High Quality

 

Features:
Built for Efficiency

• Wide Range of Motion

• Fuel Efficient Dongfeng Cummins Engine

• LiuGong Suction Cooling System

Easy to Maintain

• Easy Engine Access

• Convenient Maintenance Ports

• Hydraulic Pipes of Both Sides

Always Reliable

• • High Torsion

• • World Class Components
  • Parts, Service, and Attachments to Count on

Built for Efficience

World-class Dongfeng Imported engine with high power and low fuel consumption.Scraping knife has 360 degree rotation, 90 degree right/left lateral adjustment, and 40-70 degree penetration for leveling, trenching, ditching, wall scraping and more.LiuGong designed suction cooling system has better cooling, lower wind sensitivity and is less impacted by dirt than normal systems.

Easy to Maintain

Hydraulic pipes on both sides of frame for easy maintenance.

Easy engine access and access to main maintenance points.

1. Hydraulic transmission controlled by electricity
2. Working equipment controlled multi-valve, short operating bar, adjustable operating table, instrument
3. No-spin(differential), planetary speed-reduction transmission system
4. Hydraulic brake system
5. Hydraulic steering system
6. Cabin equipped structure can make the blade tilt by 900 tums round by 3600
7. Air-conditioner

World-class Dongfeng Cummins engine with high power and low fuel consumption. 
Scraping knife has 360 degree rotation, 90 degree right/left lateral adjustment, and 40-70 degree penetration for leveling, trenching, ditching, wall scraping and more. 
LiuGong designed suction cooling system has better cooling, lower wind sensitivity and is less impacted by dirt than normal systems.
Meeting EU stage II/EPA tier 2 emission standards.
 

Engine		DCEC 6BTAA5.9-C190
Rated Power	(kW)	142(190)@2200
Blade Width	mm(inches)	3960(156)
Maximum Speed	km/h (mph)	42 (26)
Draw Bar Pull	(kN)	84
Operating Weight	kg(Lb)	15500(34172)
ENGINE
Tier		II
Make		Dongfeng Cumins
Gross Power	kW(Hp)@rpm	142(190)@2200
Net Power	kW(Hp)@rpm	128(172)@2200
Peak Torque		800N.m/1500rpm
Torque Rise %		30%
Number of Cylinders		6
Aspiration		turbo air-to-air aftercooled
TRANSMISSION
Transmission Type		power shift
Transmission Configuration		6f/3r
Torque Converter		three-member single turbine
Maximum Travel Speed, fwd	(km/h)	42
Maximum Travel Speed, rev	(km/h)	26.1
Number of Speeds, fwd		6
Number of Speeds, rev		3
AXLES
Front Axle Make		LiuGong Weld axle
Rear Axle Make		Meritor
Differential Type		NO-SPIN limited slip standard
Final Drive Type		chain drive
Axle Oscillation		±15°
Front Axle Type		all welded steel frame
Front Axle, Wheel Lean Angle		±17°
STEERING
Steering Configuration		load sensor steering gear
Steering Relief Pressure	(Mpa)	17
Minimum Turning Radius	(inches)	7800(307)
Steering Angle		±45°
Frame Articulation Angle		±20°
BRAKES
Service Brake Type		(Dry)shoe
Service Brake Location		rear axle only
Service Brake Actuation		hydraumatic
TIRES
Tire Size		17.5-25 PR12/L3
HYDRAULIC SYSTEM
Main Pump Type		gear
Main Relief Pressure	(Mpa)	18
Pilot Pump Flow	L(Gal)/min	126(33)
WORKING CAPACITIES
Maximum Draw Pull	(kN)	84
Cutting Pressure	kg(Lb)	7800(17196)
TANDEM DRIVE PERFORMANCE
Height	mm(inches)	600(24)
Width	mm(inches)	210(8)
Thickness, inner wall / outer wall	mm(inches)	20/20(0.8/(0.8)
Center Distance	mm(inches)	1538(61)
Oscillating Angle		±15°
MOLDBOARD PERFORMANCE
Bank Cut Angle		40~70
Moldboard Lift Above Ground	mm(inches)	450(18)
Moldboard Side Shift, right / left	mm(inches)	725/675(29/27)
Maximum Sloping Angle		90°
Cutting Depth	mm(inches)	555(22)
Circle Rotation		360°
Circle Diameter	mm(inches)	1455(57)
Circle Thickness	mm(inches)	140(6)
DIMENSIONS
Wheelbase	mm(inches)	6230(245)
Overall Length	mm(inches)	9238(364)
Overall Height with Cab		3580(141)
Overall Width	mm(inches)	2600(102)
Clearance under Front Axle	mm(inches)	645(25)
Moldboard Standard Length	mm(inches)	3960(156)
Moldboard Standard Thickness	mm(inches)	19(0.7)
Moldboard Standard Height	mm(inches)	610(24)
OPERATING WEIGHTS
Operating Weight	kg(Lb)	15500(34172)
On Front Wheels	kg(Lb)	4400(9700)
On Rear Wheels	kg(Lb)	11100(24471)
SERVICE CAPACITIES
Fuel Tank	L(Gal)	270(71)
Engine Oil	L(Gal)	22(6)
Cooling System	L(Gal)	45(12)
Hydraulic Reservoir	L(Gal)	186(49)
Transmission And Torque Converter	L(Gal)	45(12)
Tandems, Each	L(Gal)	28(7)

Contact Person: Victory Xie
Mobile: [phone]